Features
| Type of machine | Winner Pro 1K (L) | Winner Pro 2K (L) | Winner Pro 3K (L) | Winner Pro 6K (L) | Winner Pro 10K (L) |
| Phase | Single phase grounding |
| Capacity * | 1000 VA / 800 W | 2000 VA / 1600 W | 3000 VA / 2400 W | 6000VA / 4800W | 10000 VA / 8000 W |
| Input |
| Input Voltage | 100/110/115/120/127VAC or 200/208/220/230/240VAC | 208/220/230/240VAC |
| Voltage Range | 55-150 VAC or 110-300 VAC at 50% load 85-140VAC or 160-280VAC at
100% load | 110-300 VAC at 50% load 176-300 VAC at 100% load |
| Frequency Range | 40 Hz ~ 70 Hz | 46~54 Hz 或 56~64 Hz |
| Power factor | ≧ 0.99 @ 100% load |
| Output |
| Output Voltage | 100/110/115/120/127VAC or 200/208/220/230/240VAC | 208/220/230/240VAC |
| Voltage stabilization accuracy (battery mode) | ± 1 % |
| Frequency range (synchronous correction range) | 47~ 53 Hz or 57 ~ 63 Hz | 46~54 Hz or 56~64 Hz |
| Frequency range (battery mode) | 50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz | 50 Hz or 60Hz ± 0.1 Hz |
| Peak coefficient | 3:1 |
| Harmonic distortion | ≦ 3 % THD (Linear load ) ≦ 6 % THD (Nonlinear load ) | ≦ 3 % THD (Linear load ) ≦ 5 % THD (Nonlinear load ) |
Conversation Time | Mains to battery | Zero |
| Inverter to bypass | 4 ms(Under standard conditions ) | None |
| Waveform (battery mode) | Pure sine wave |
| Efficiency |
| Utility mode | 88% | 88% | 90% | 92% | 93% |
| Battery mode | 83% | 87% | 88% | 90% | 91% |
| Battery |
Stander machine | Battery model | 12 V / 9 Ah | 12 V / 9 Ah | 12 V / 9 Ah | 12 V / 9 Ah |
| Quandity | 2 | 4 | 6 | 16 | 20 | 16 | 20 |
| Standard charging time | Charge to 90% in 4 hours | Charge to 90% in 9 hours |
| Maximum charging current | 1 A | 1 A / 2 A |
| Charging voltage | 27.4VDC ± 1% | 54.7 VDC ±1% | 82.1 VDC ±1% | 218.4 VDC ±1% | 273 VDC ±1% | 218.4 VDC ±1% | 273 VDC ±1% |
Long acting machine | Battery model | Depends on the applicant |
| Quandity | 2 | 3 | 4 | 6 | 8 | 6 | 8 | 16 ~ 20 (Adjustable ) |
| Maximum charging current | 1A/2A/4A/6A (Adjustable ) | 1A/2A/4A/6A (Adjustable , 6A only works with 16 batteries ) |
| Maximum charging current | 27.4VDC ± 1% | 41.0VDC ± 1% | 54.7 VDC ±1% | 82.1 VDC ±1% | 109.4VDC ±1% | 82.1 VDC ±1% | 109.4VDC ±1% | 273 VDC ± 1%(basic on 20 pieces) |
| Display description |
| LCD | Load size, battery capacity, utility mode, battery mode, bypass
mode, fault indiCAT-parts-partsion |
| Warning sound |
| Battery mode | It rings every 4 seconds |
| Low battery | It rings every second |
| Overload | It rings every second |
| Fault | Continuous sound |
| Physical Property |
| Stander machine | Dimension, D*W*H(mm) | 282 x 145 x 220 | 397 x 145 x 220 | 421 x 190 x 318 | 369 x 190 x 688 | 442 x 190 x 688 |
| Net Weight (KG) | 9.8 | 17 | 27.6 | 61 | 74 | 66 | 76 |
| Long acting machine | Dimension, D*W*H(mm) | 282 x 145 x 220 | 397 x 145 x 220 | 369 x 190 x 318 | 442 x 190 x 318 |
| Net Weight (KG) | 4.1 | 6.8 | 7.4 | 12 | 16 |
| Usage environment |
| Humidity | 20-90 % RH @ 0- 40°C (No condensation) | Relative humidity 0-95% & temperature 0-50 ° C (no condensation) | Relative humidity 0-95% & temperature0-40 ° C (no condensation) |
| Noise | Less than 50dba @ 1m | Less than 50dba @ 1m | Less than 50dba @ 1m |
| Control management |
| ntelligent RS-232 / optional USB | Support Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux & MAC |
| Optional SNMP | Power management supports SNMP management and network management |
● Advanced dual-core DSP control technology and 3-level technology
● Output power factor 1.0
● Active Power Factor Correction Technology, input power factor up
to99
● System efficiency improved to 96%, energy saving rate is doubled
● Working efficiency up to 99% in ECO mode
● Dual input design, supporting independent bypass
● Advanced digital and parallel technology, providing higher
reliability than single system
● Wide input voltage range, 50 / 60 Hz auto-sensing frequency
● 50 Hz / 60 Hz frequency conversion mode
● Compact internal layout, small footprint
● Fan speed varies intelligently with temperature, reducing noise
and extending its service life
● Features strong fault tolerance, one fan damaged takes 50% of the
load, two fans damaged take 30% of the load
● Conformal coating technology to make UPS operate in harsh
environment for a long time
● Effective hardware and software protection, robust self-diagnosis
function, abundant event log for future check
● Linear downgrading in low voltage input reducing battery
discharging times
● Flexible battery configuration setting, selectable battery
numbers: 30 ~ 44 pcs
● Digitally controlled charger (Max.36 A )
● Ability to switch on the UPS by battery in the absence of mains
power (Cold start)
● Zero switching time for UPS power supply mode when the mains
power is unstable, ensuring the output is uninterrupted
● Settable delayed start time when mains power is restored
● 5 inches LCD colorful touch screen, friendly human & machine
interface
● Powerful background software for parameters configuration and
online upgrade
● Advanced multi-platform communiCAT-parts-partsion for UPS
monitoring: RS232, USB, RS485, CAN, NET, dry contacts, SNMP
card,Wi-Fi card and GPRS card
● Intelligent battery management, automatic equalized and float
charging control, charger dormancy control, improving the
reliability of charger and extending the battery life
● Options and accessories: RS232, USB, RS485, NET, parallel, LBS,
dry contacts, EPO and battery temperature compensation interfaces
supplied; optional SNMP card, Wi-Fi card, GPRS card, battery
temperature sensor, EMD detector and SMS alarms
